Acceptable Media Widths - Roland CAMM JET CJ-70 User Manual

18 Acceptable Media Widths

CJ-70
Acceptable media widths
Sheet material : 160 mm — 1372 mm (6-5/16"— 54")
Roll material : 160 mm — 1320 mm (6-5/16"— 52") (When using roll material, the loadable material width is narrower
than for a flat sheet by an amount corresponding to the dimensions of the media flanges.)
Material
48" (approx. 1219 mm)
50" (approx. 1270 mm)
54" (approx. 1372 mm)
When loading material with a width other than one indicated above, move the right-hand movable pinch roller.
Material
with a
width 48"
Material with a width
of 50" or more
(1*) Position of the pinch roller (middle) when using
material with a width of 30"
(2*) Position of the pinch roller (middle) when using
material with a width of 36" or 42"
(3*) Position of the pinch roller (middle) when using
material with a width of 48", 50" or 54"
36" (approx. 914 mm)
42" (approx. 1067 mm)
The right-hand movable pinch roller can be moved within this range.
Material with Material with Material with
a width 42" a width 36" a width 30"
Do not set the pinch roller here.
54" (approx. 1372 mm)
24" (approx. 610 mm)
30" (approx. 762 mm)
Material Material with
with a width a width 18"
24"
(3*) (2*) (1*)
: Grit roller
: Pinch roller (left)
12" (approx. 305 mm)
18" (approx. 457 mm)
Material with
a width 12"
: Pinch roller (middle)
: Pinch roller (right)
150 mm
(5-7/8")
33