Acceptable Material Widths - Roland CammJet CJ-500 User Manual

Acceptable material widths

CJ-500:
90 to 1371 mm (3-9/16 to 54 in.)
* However, when loading material with a width of 90 to 430 mm (3-9/16 to 17 in.), set the [EDGE SENSE] menu
item to [DISABLE].
Material
Approx. 1190 mm (46-7/8 in.)
Approx. 1371 mm (54 in.)
Material with
a width
1190 and 1371 mm
(46-7/8 and 54 in.)
: Grit roller
: Pinch roller (left)
(*1) Position of the pinch roller (middle) when using material with a width of 742, 922, 960 and 1140 mm.
(*2) Position of the pinch roller (middle) when using material with a width of 1190 and 1371 mm.
* Lowering the middle pinch roller during printing may damage the printing surface. At such times, position the pinch
rollers away from above the grit rollers.
Approx. 742 mm (29-3/16 in.)
Approx. 922 mm (36-5/16 in.)
Approx. 960 mm (37-13/16 in.)
Approx. 1140 mm (44-7/8 in.)
Material with Material with
a width a width
960 and 1140 mm 742 and 922 mm
(37-13/16 and 44-7/8 in.) (29-3/16 and 36-5/16 in.)
(*2)
: Pinch roller (middle)
: Pinch roller (right)
Approx. 430 mm (16-15/16 in.)
Approx. 610 mm (24 in.)
Material with
a width
430 and 610 mm
(16-15/16 and 24 in.)
(*1)
* Make sure the left and right pinch rollers
are positioned above the grit rollers.
User's Reference
180 mm
(7-1/16 in.)
71