When Not In Use For A Prolonged Period; When Moving The Unit - Roland CAMM JET CJ-70 User Manual

When Not in Use for a Prolonged Period...

Do not switch off the main power with the ink head in an uncapped state (i.e., while the printing carriage is on the platen).
If you leave the printing carriage uncapped for a long time, doing so may result in clogging of the ink head, making it
unusable.
Before switching off the main power, be sure to press the
1
Press the
The printing carriage moves to the standby
position and the head is capped.
If the printing carriage is already at the
standby position, no movement takes place.

15 When Moving the Unit...

When moving the CJ-70/60, first remove any ink remaining in the unit and secure the printing head in place.
1
Remove the material, blade holder, and ink cartridge.
2
Press the
the following screen appear on the display.
4
Use the key to select "PUMP-UP," then
press the
INK CONTROL
PUMP-UP
Ink discharge is carried out about ten minutes.
6
Detach the power cord and the cable connecting
the unit to the computer.
8
Referring to "Unpacking and Repacking" on the packing carton, secure the printing head in place and pack the unit in the
carton.
key to switch off the power.
Printing carriage
key and key to make
MENU
INK CONTROL
key.
key to switch off the sub power for the CJ-70/60.
POWER LED goes out
Standby position
3
Press the
screen appear on the display.
5
The following screen appears on the display, and the
sub power is automatically switched off.
PUMP-UP
NOW PROCESSING..
7
Remove the discharge tank. Refer to "5 For Details on
the Drain Tank" for disposal of the ink within the tank.
2
Turn off the main power
switch.
3
Unplug the power cord
from the electrical outlet.
key to make the following
INK CONTROL
INK EMPTY
POWER LED goes out
When the POWER LED
goes out, turn off the main
power switch.
23