Roland CAMM JET CJ-70 User Manual page 36

CJ-60
Acceptable media widths
Sheet material : 160 mm — 1100 mm (6-5/16"— 43-5/16")
Roll material : 160 mm — 1050 mm (6-5/16"— 41-5/6") (When using roll material, the loadable material width is
narrower than for a flat sheet by an amount corresponding to the dimensions of the media flanges.)
Material
41-5/6" (approx. 1050 mm)
43-5/16" (approx. 1100 mm)
Material with a
width of 41-5/6"
or more
(1*) Position of the pinch roller (middle) when using
material with a width of 36"
(2*) Position of the pinch roller (middle) when using
material with a width of 41-5/6" or more
34
36" (approx. 914 mm)
Material with
Material
a width 36"
with a width
24"
Do not set the pinch roller here.
43-5/16" (approx. 1100 mm)
18" (approx. 457 mm)
24" (approx. 610 mm)
Material with Material with
a width 18" a width 12"
(2*) (1*)
: Grit roller
: Pinch roller (left)
12" (approx. 305 mm)
150 mm
(5-7/8")
: Pinch roller (middle)
: Pinch roller (right)