Usb/Card Reader Board - HP 15 Maintenance And Service Manual
Laptop pc
Hide thumbs
Also See for 15:
- Maintenance and service manual (162 pages) ,
- Product end-of-life disassembly instructions (4 pages) ,
- User manual (115 pages)
Table of Contents
Advertisement
USB/card reader board
Description
USB/card reader board
USB/card reader board cable
Before removing the USB/card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the optical drive (see
5.
Remove the bottom cover (see
6.
Remove the battery (see
Remove the USB/card reader board:
1.
Disconnect the cable from the ZIF connector on the USB board (1).
2.
Remove the Phillips M2.0×3.0 screw (2), and then remove the board from the computer (3).
Reverse this procedure to replace the USB/card reader board.
52
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Optical drive on page
Bottom cover on page
Battery on page
40).
33).
37).
Spare part number
L20448-001
L20452-001
Hide quick links:
Advertisement
Table of Contents
