5.3.6 Reset to Factory Defaults
Introduction
Resetting the
SpeedTouch™ factory
defaults
E-DOC-CTC-20051017-0148 v1.0
The Reset to Factory Defaults page allows you to reset the SpeedTouch™ to return
to the initial configuration of your SpeedTouch™. All your changes will be
deleted.The following message appears:
Proceed as follows:
1
In the left menu, click SpeedTouch.
2
In the Pick a task list, click Return to Factory Default Settings.
3
Click Yes, reset my SpeedTouch.
If you reset your SpeedTouch™ to factory default settings, all active
!
connections will be disconnected.
Chapter 5
SpeedTouch™ Web Interface
61