THOMSON SpeedTouchTM706 User Manual page 80

Chapter 5
SpeedTouch™ Web Interface
Configure
Expert Configure
72
This page allows you to:
Disable/enable the telephone service.
Configure your VoIP settings:
SIP Uniform Resource Identifier (URI)
Username and password:
The username and password are used when authentication is requested
by another SIP entity such as a Proxy or Registrar.
Port:
The voice port that will be associated with this account.
On this page you can view/change the following SIP parameters:
Registrar:
The IP address of your SIP registrar.
Registrar Port:
The port used by your SIP registrar (usually port 5060). This port will be used
to contact the SIP registrar.
Proxy:
The IP address of your SIP proxy.
Proxy Port:
The port used by your SIP proxy (usually port 5060). This port will be used to
contact the SIP proxy server.
Expire Time
When the Expire Time is not filled in, a default value of 3600 seconds will be
used.
E-DOC-CTC-20051017-0148 v1.0