THOMSON SpeedTouchTM706 User Manual page 47

Enable the telephony
service
Assign phone numbers
Configure the telephony
service
E-DOC-CTC-20051017-0148 v1.0
Proceed as follows to enable the telephony service:
1
Go to the SpeedTouch™ Web pages.
For more information, see
page 7.
2
In the menu, select Toolbox > Telephony.
3
In the upper right corner, click Configure.
4
Select Service Enabled.
5
Click Apply.
Proceed as follows to configure your Internet SIP telephone numbers:
1
Go to the SpeedTouch™ Web pages.
2
In the menu, select Toolbox > Telephony.
3
In the upper right corner, click Configure.
4
Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you
want to use the same number for both ports, select Port 'all'.
The phone numbers are provided by your provider.
5
Click Apply.
Proceed as follows to configure the SIP telephony service:
1
Go to the SpeedTouch™ Web pages.
2
In the menu, select Toolbox > Telephony.
3
In the upper right corner, click Expert configure.
4
Enter the IP address and the port number of the registrar and the proxy, as
"1.2.1 Access via the Web Interface" on
Chapter 4
Voice over IP
39