Wireless Repeater Labels; Wireless Keypad Programming; Automatic Wireless Keypad Assignment; Compatibility Check (K37 Only) - Paradox Magellan MG5000 Programming Manual

Magellan & Spectra SP • Programming Guide

Wireless Repeater Labels

Use worksheet 23 to record your settings for wireless repeater labels. To reset these labels, see Description of Section [965] on page 53.

Worksheet 23: Wireless Repeater Labels

Section Description
[568] Repeater 1 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[569] Repeater 2 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__
NOTE: For special characters and keypad letter assignments, see Label Programming with LCD Keypads on page 54.

Wireless Keypad Programming

Automatic Wireless Keypad Assignment

After powering-up, the control panel will open a ten-minute window for automatic assignment. To assign a keypad to your MG/SP control panel, press and hold
and for three seconds on the respective keypad. Up to eight wireless keypads can be assigned within this ten-minute period.
BYP

Compatibility Check (K37 only)

If the K37 is not compatible with the current MG/SP control panel version, the following trouble will be displayed: [
your MG/SP control panel to version 3.2 or higher.

Standard Wireless Keypad Assignment

Use worksheet 24 to record your settings, when assigning wireless keypads to your MG/SP control panel. To assign your wireless keypads, enter the serial number or
press and hold and for three seconds.
BYP

Worksheet 24: Wireless Keypad Assignment

Section Description Wireless Keypad Serial Number
[571] Keypad 1 ___/___/___/___/___/___
[572] Keypad 2 ___/___/___/___/___/___
[573] Keypad 3 ___/___/___/___/___/___
[574] Keypad 4 ___/___/___/___/___/___
[575] Keypad 5 ___/___/___/___/___/___
[576] Keypad 6 ___/___/___/___/___/___
[577] Keypad 7 ___/___/___/___/___/___
[578] Keypad 8 ___/___/___/___/___/___

Wireless Keypad, Repeater, and Siren Options

Table 19: Description of section [587]
Option Description
1 Repeater 1 supervision
2 Repeater 2 supervision
3 Wireless siren 1 supervision
4 Wireless siren 2 supervision
NOTE: To cancel the wireless siren tamper supervision, see Cancelling the Tamper Supervision for Wireless Sirens on page 37.
Wireless Keypad Options
Table 20: Description of section [588]
Option Description
1 Keypad 1 supervision
2 Keypad 2 supervision
3 Keypad 3 supervision
4 Keypad 4 supervision
= Default
Version 4.7/4.92/5.12
Wireless Repeater Label
[587]
Option Description
OFF ON


5 Wireless siren 3 supervision


6 Wireless siren 4 supervision


8 Live display mode


= Default
[588]
Option Description
OFF ON


5 Keypad 5 supervision


6 Keypad 6 supervision


7 Keypad 7 supervision


8 Keypad 8 supervision
: ] [17: ]. If this occurs, update
TROUBLE FLASH ON
[587]
OFF ON






[588]
OFF ON








Wireless Keypad Programming | 33