Country Codes; Customized Daylight Savings Features; Partition Programming; Partition Options - Paradox Magellan MG5000 Programming Manual

32-zone wireless transceiver security spectra sp series magellan series systems and 32-zone wireless transceiver security systems

Hide thumbs Also See for Magellan MG5000:

Programming manual (48 pages)

User manual (32 pages)

Reference & installation manual (69 pages)

Table Of Contents

Table of Contents

Country Codes

Table 31 lists countries and their respective codes. This information is required when programming section [731] (see worksheet 31 for details).

Table 31: Country codes for MG/SP control panels

Input Value Country

Mexico; St. Johns; Bahamas; Turks and Caicos

Cuba

Brazil

Chile

Falkland Islands

Paraguay

European Union; United Kingdom; Greenland

Russia and surrounding countries

South Australia; Victoria; Australian Capital Territory; New

South Wales

Tasmania; Lord Howe Island

Customized Daylight Savings Features

In addition to using the default Daylight Saving Time (DST) settings in section [731], you can also set a customized DST. In sections [732] and [733], you can

program DST starting and ending periods, respectively. Both these sections recognize five different entries, consisting of two digits each.

All entries must be made in the following order:

Month: 01 to 12, where 01 represents January

Date: 01 to 31, where 01 represents the first day of the month

Day: 00 to 07, where 00 is the default setting and 01 represents Sunday

Hours: 00 to 23, where 00 represents 12:00 AM

Minutes: 00 only, where 00 represents the top of the hour (e.g., 12:00 AM)

NOTE: If the Day value is set to 00, it is ignored and the DST change will only respect the Date value. If the Day setting is set to a value other than 00 (e.g., 03 for

Tuesday), the DST time change will occur on the first Tuesday following the programmed Date value.

Worksheet 31: Daylight Savings Time

Section

[731]

___/___

[732]

__/__/__/__/__/__/__/__/__/__

[733]

__/__/__/__/__/__/__/__/__/__

NOTE: If sections [732] and [733] have been modified, but you want to revert to a standard DST code, change all settings in sections [732] and [733] to 00.