Communication Report Codes; Communication Restore Report Codes; Software Options And Additional Timers; Additional Communication Timers - Paradox Magellan MG5000 Programming Manual

Magellan & Spectra SP • Programming Guide
Table 45: List of automatic report codes (Continued)
RF zone supervision lost
RF zone supervision restore
RF module supervision lost
RF module supervision restore
RF module tamper restore
Remote low battery restore

Communication Report Codes

Use worksheet 47 to record your settings for communication report codes. Sections [879] and [884] apply to both GSM and network (GPRS/GSM) communications.
See Communication Programming on page 42, for more communication features. In addition, refer to Description of Sections [966] and [967] on page 54, for clearing
and resetting codes.

Worksheet 47: Communication Report Codes

Section Data Description
___/___ PCS series RF jam
___/___ PCS series no service
[879] PCS series module
___/___
supervision lost
Receiver fail to
___/___
communicate (GPRS)

Communication Restore Report Codes

Use worksheet 48 to record your settings for communication restore report codes. Section [881] applies to both GSM and network (GPRS/GSM) communications.

Worksheet 48: Communication Restore Report Codes

Section Data Description
___/___ PCS series RF jam
___/___ PCS series no service
[881]
___/___ PCS series module supervision lost
___/___ Receiver fail to communicate (GPRS)

Software Options and Additional Timers

Use the following section to program software options and additional communication timers on your MG/SP control panel.
Table 46: Description of section [900] (WinLoad/BabyWare options)
Section Option Description
1 Call back
[900]
2 Automatic event buffer transmission
= Default

Additional Communication Timers

Use worksheet 49 to record your settings for sections [901] and [902]. For additional timers, see worksheets 38 and 40. Sections [901] and [902] are also applicable
when using a VDMP3 Plug-in Voice Dialer.

Worksheet 49: Additional Communication Timers

Section
[901] ___/___/___ 000 to 255 rings
[902] ___/___/___ 000 to 255 secs. (max 127)
Version 4.7/4.92/5.12
System Event Default Contact ID Report Code
1 381 Loss of supervision - RF
3 381 Supervision restore - RF
1 381 Loss of supervision - RF
3 381 Loss of supervision - RF restore
RF module tamper 1 145 Expansion module tamper
3 145 Expansion module tamper restore
Paramedic alarm 1 1AA Medical
Zone forced 1 57A Zone forced
Zone included 3 57A Zone included
Remote low battery 1 338 Battery failure on module
3 338 Battery failure on module restore
Failed to arm 1 454 Failed to close
Section
___/___
___/___
[880]
___/___
___/___
Section
[882]
OFF

Disabled

Disabled
Data Description
Number of rings
Answering machine override delay
Default SIA Report Code
Data Description
-
IP100 no service
IP100 supervision lost
IP receiver fail to
communicate
Data Description
___/___ -
___/___ IP100 no service
___/___ IP100 supervision lost
___/___ IP receiver fail to communicate
ON

Enabled

Enabled
US Untype zone supervision
UR Untyped zone restoral
US Untyped zone supervision
UR Untyped zone restoral
ES Expansion device tamper
EJ Expansion device restore
MA Medical alarm
XW Zone forced
UU Zone included
YT Module battery fail
YR Module battery fail restore
CI Failed to close
Section Data Description
GSM lost communication
___/___
with panel
___/___ -
[884]
___/___ -
___/___ -
Default
008
030
Software Options and Additional Timers | 51