Table of Contents
Advertisement
4.3.1 Voice Messages
If key [1] is selected from the Store Messages menu, you will be able to
record voice messages. Depending on the selected Voice Message Length
(programmed by the installer) you will be able to record two 30 second
messages or four 15 second messages. Each recorded message is linked to
a specific zone input as shown in the figure on the previous page. When a
triggered zone has been programmed to dial-out a voice message telephone
number (see section 4.5 on page 14) and when the number is reached, the
ParaVox will play the recorded message linked to the triggered zone.
Default Messages:
"Trigger of zone x detected. Key hash twice or star twice to accept."
Sample Voice Messages:
"Liquid level above normal"
"Smoke detected in the archive room"
We recommend adding the following to your voice messages:
"...press the [#] or [*] key twice to acknowledge message"
4.3.2 Program Output Labels (messages)
Selecting the [2] key from the Store Messages menu allows the user to
record voice prompts linked to the programmable outputs (3 seconds
maximum) as shown in the diagram on page 11. These messages are played
when entering the User's Opening Menu and when changing the state of the
programmable outputs (see section 3.0 on page 6).
Default Labels (messages):
"Output 1 is <on/off>"
"Output 2 is <on/off>"
4.3.3 Pager Messages
If key [3] is selected from the Store Messages menu, you will be able to
record numerical pager messages. Up to four 32-digit pager messages can
be programmed each of which is linked to a specific zone input as shown in
the figure on the previous page. When a triggered zone has been
programmed to dial-out a pager number (see section 4.5 on page 14) and
when the number is reached, the voice dialer will transmit the recorded
numerical message linked to the triggered zone.
12 User's Guide
Sample Program Output Labels:
"Garage door is open"
"Air conditioning is off"
Hide quick links:
Advertisement
Table of Contents
