Table of Contents
Advertisement
MG-REM1
The
button of the MG-REM1 and MG-REM2 remote controls has been permanently programmed to disarm the system. However,
when the system is disarmed and the Magellan console's radio is on (MG-6160 only), the
The button's functionality cannot be altered. The
request feedback from the system. The button's functionality cannot be altered. The
combinations do not function with the MG-REM1 remote control. The
with the MG-REM2 remote control.
When section [040] is accessed, the console will display the contents of section [041] and copy the saved value of that section to all remote
options: [041] to [56].
Assigning Wireless Keypads
Sections [243] to [246]: Keypads 1-4
Sections [243] to [246] represent keypads 1 to 4.
To assign a wireless keypad:
1. Access the installer programming mode (see page 13).
2. Enter the [
] corresponding to the desired keypad.
SECTION
3. Enter the 6-digit [
SERIAL NUMBER
Assigning Wireless Repeaters
Sections [247] to [248]: Repeater 1-2
Sections [247] to [248] represent repeater 1 and 2.
To assign a wireless repeater:
1. Access the installer programming mode (see page 13).
2. Enter the [
] corresponding to the desired repeater.
SECTION
3. Enter the 6-digit [
SERIAL NUMBER
Paradox Magellan Systems
0 - Button disabled
1 - Regular arming
2 - Stay arming
3 - Instant arming
4 - Force arming
5 - N/A
6 - N/A
7 - N/A
8 - Panic 1†
9 - Panic 2†
A* - Panic 3†
B* - PGM Activation (Event Group #7, see Appendix 1: PGM Event Table)
C* - PGM Activation (Event Group #8, see Appendix 1: PGM Event Table)
D* - Turn FM radio ON/OFF (MG-6160 only)
E* - FM radio memory scan (MG-6160 only)
MG-REM2
F* - Non-medical alarm
* = Hex values A to F are keys [1] to [6] from Magellan's Center Keypad.
Refer to Figure 1 on page 2.
† = The panic feature (section [091] options [1] to [3]) must be enabled.
] of the wireless keypad.
] of the wireless repeater.
Button Options Table
button of the MG-REM2 remote control has been permanently programmed to
+
,
Wireless Repeater Options
Section [300] to [305]:Options [1] to [8]; Repeater 1 options
Section [306] to [311]:Options [1] to [8]; Repeater 2 options
Defaults = OFF
Sections [300] to [303] represent zone repeating options for
Repeater 1. Section [304] represents PGM repeating options for
Repeater 1. Section [305] represents wireless keypad and
doorbell repeating options.
Sections [306] to [309] represent zone repeating options for
Repeater 1. Section [310] represents PGM repeating options for
Repeater 1. Section [311] represents wireless keypad and
doorbell repeating options.
By default, each option is OFF. Enable the option to have the
respective zone/PGM/wireless keypad/doorbell repeated.
button can be used for volume control.
+
+
and
,
+
and
+
button combinations do not function
+
button
21
Advertisement
Table of Contents
