The existing label displayed on the LCD screen can be modified to suit the installation's needs. Each label contains a maximum of 16 characters.
To re-program the System Label, enter the desired section and use Table 9, Table 11 and Table 10 (page 57) to modify the label. For other languages, refer to Table 12
to table 16 on page 59.
Zone Labels: Sections [0301] to [0396] represent Zones 01 to 96.
Door Labels: Sections [2301] to [2332] represent Doors 01 to 32.
Partition Labels:
Partition 1: [3100]
Partition 3: [3300]
Partition 2: [3200]
Partition 4: [3400]
Table 9: Keys
Press
Feature
[
]
STAY
Insert Space
Inserts a blank space in the cursor's position
[
]
FORCE
Delete
Deletes the character or blank space found at the cursor's position
[
]
ARM
Delete Until the End Deletes all characters and spaces to the right of the cursor and at the cursor's position
Numeric or
[
]
DISARM
Switches from numeric keys to alphanumeric keys and vice versa (see Table 10)
Alphanumeric
Lower or Upper
[
]
BYP
Switches the case setting from lower to upper case and vice versa
Case
The cursor will turn into a flashing black square. Enter the 3-digit number that represents the
[
]
MEM
Special Characters
desired symbol (see table 11 on page 57, table 15 on page 58 and table 16 on page 59).