Common Management Module Cli Operations - Fortinet FortiGate-7060E System Manual

Common management module CLI operations

Common management module CLI operations
The following table lists many of the operations you can perform from the management module CLI and the
commands you use to perform them. Only a subset of these commands are available on the passive
management module as indicated below. Also, the <slot> option is not available on the passive module.
Action
Log into the CLI.
Log out of the CLI.
Available on the
passive module.
Display all commands.
Available on the
passive module.
Display information
about all SMC
firmware in the
chassis.
Display SMC device
ID, Build
Date/Number, SMC
firmware information,
address info, entity
map for the device in
the slot. Available on
the passive module.
Switching active
management module.
The active
management module
becomes passive and
the passive becomes
active. Available on
the passive module.
Display status, power
budget and hot swap
state for all modules.
Available on the
passive module.
List the IPMI channels.
35
SMC CLI Commands
Ctrl-R
exit (followed by Ctrl-R)
help
info
info <slot>
smm_switch
status
channel list
FortiGate-7060E Management Modules
IPMI Commands
N/A
N/A
help
mc info
N/A
N/A
N/A
channel info [<channel-
number>]
FortiGate-7060E System Guide
Fortinet Technologies Inc.