Common Smm Cli Operations - Fortinet FortiGate-7030E System Manual

FortiGate-7030E System Management Module
linearization parameters, sensor thresholds, and so on. The following commands display information stored in the SDR.
Operation
Display current local sensor values
and sensor SDRs or sensor
thresholds for a module. Available
on the passive module.
Set Sensor thresholds

Common SMM CLI operations

The following table lists many of the operations you can perform from the SMM CLI and the commands you use to
perform them.
Action
Log into the CLI.
Log out of the CLI.
Available on the
passive module.
Display all
commands.
Available on the
passive module.
Display information
about all SMC
firmware in the
chassis.
Display SMC device
ID, Build
Date/Number, SMC
firmware
information, address
info, entity map for
the device in the slot.
Available on the
passive module.
Display status, power
FortiGate-7030E 6.2.3 System Guide
SMC CLI Commands
sensor <slot>
sensor_thresholds <slot>
N/A
SMC CLI Commands
Ctrl-R
exit (followed by Ctrl-R)
help
info
info <slot>
status
Fortinet Technologies Inc.
IPMI Commands
sensor
sensor hexlist
sdr list
sdr elist
-v sdr list
( -v required when using the Windows
command prompt)
sensor thres help
(use this command to display online help
for setting sensor thresholds)
IPMI Commands
N/A
N/A
help
mc info
N/A
N/A
48