Installing Accessories - Fortinet FortiGate-7060E System Manual

FortiGate-7060E hardware assembly and rack mounting

Installing accessories

These accessories are optional and not required for all configurations. If you have them, before mounting the
chassis in a rack you should install the left and right front mounting brackets and the cable management brackets
as shown in the following illustration.
Installing FortiGate-7060E accessories
Front Mounting
M4x8 flat-head
screws
M4x8 large head
pan head screws
Left Cable
Management
Bracket
Front Cable
Management
Bracket
You can also install power cord clamps into the front of the chassis beside each PSU. Install the clamps by
inserting them into the holes adjacent each supply at the back of the chassis. Use the clamps to secure the AC
power cords so they are not accidentally disconnected.
FortiGate-7060E System Guide
Fortinet Technologies Inc.
Bracket
Power Cord
Clamps
Right Cable
Management
Bracket
Front Mounting
Bracket
M4x8 large head
pan head screws
Installing accessories
M4x8 flat-head
screws
20