Mounting The Fortigate-7060E Chassis In A Four-Post Rack - Fortinet FortiGate-7060E System Manual

8u 19-inch rackmount 6-slot chassis with a 80gbps fabric and 1gbps base backplane
Hide thumbs Also See for FortiGate-7060E:
Table of Contents

Advertisement

Mounting the FortiGate-7060E chassis in a four-post rack

Mounting the FortiGate-7060E chassis in a four-post rack
The FortiGate-7060E package includes a set of extendable brackets that you can use to mount the chassis in a 4-
post rack. Install the brackets to create a 4-post rack mount tray that the chassis will slide on to. Attach each side
of the tray to the 4-post rack using the front and back brackets as shown below. Make sure you install the tray with
enough space above it for the chassis. The length of the tray sides adjusts to match your rack.
Once the 4-post rack mount tray has been installed, slide the chassis onto the tray and secure it to the rack mount
tray as shown in the diagram.
Mounting the chassis in a four-post Rack
Attach the Left
Tray to the Left
Rack Posts
Rack Mount
Screws not
provided
21
Rack Mount
Screws not
provided
FortiGate-7060E hardware assembly and rack mounting
Attach the Right
Tray to the Right
Rack Posts
Secure the Chassis
to the Rack Mount Tray
M4x6 pan-head screw
with M4 washer
Rack Mount
Screws not
provided
FortiGate-7060E System Guide
Fortinet Technologies Inc.

Advertisement

Table of Contents
loading

Table of Contents