System Event Log (Sel); Sensor Data Record (Sdr) - Fortinet FortiGate-7060E System Manual

FortiGate-7060E Management Modules

System event log (SEL)

The SMC in each module generates system event log (SEL) messages that record system events as they occur.
All SEL messages are stored by individual FIM and FPM module SMCs. They are also all collected and stored by
the management module SMC. From the management module you can use the following commands from the
active or passive management module to view and clear SEL messages.
Operation
Display the local SEL for a
module.
Clear the local SEL.
Get SEL information.
Get SEL time
Set SEL time

Sensor data record (SDR)

The sensor data record (SDR) contains static information about the sensors in each chassis module. Information
includes the Sensor ID string, sensor type, sensor event/reading type, entity id, entity instance, sensor unit,
reading linearization parameters, sensor thresholds, and so on. The following commands display information
stored in the SDR.
Operation
Display current local sensor values
and sensor SDRs or sensor
thresholds for a module. Available
on the passive module.
Set Sensor thresholds
FortiGate-7060E System Guide
Fortinet Technologies Inc.
SMC CLI Commands
sel <slot>
sel clear
N/A
time get
time set <yyyy/mm/dd
hh:mm:ss>
SMC CLI Commands
sensor <slot>
sensor_thresholds <slot>
N/A
System event log (SEL)
IPMI Commands
sel list
sel elist
-v sel list
sel clear
sel info
sel time get
sel time set
IPMI Commands
sensor
sensor hexlist
sdr list
sdr elist
-v sdr list
(-v required when using the Windows
command prompt)
sensor thres help
(use this command to display online
help for setting sensor thresholds)
34