Correct the magnification of vertical scanning of a book. The larger the adjustment value, the more the image stretches in the vertical scanning direction.

5.1.4.8 <035: - 036:Reader motor speed change>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Though no market adjustment work needs to be carried out, enter factory defaults at image processor PCB replacement.

5.1.4.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the

image becomes.

5.1.4.10 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image

becomes.

5.1.4.11 <043: Horizontal scan end position correction ((copy:scanning on ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which horizontal scanning of a document being copied ends (when scanning on a document fed from ADF). The larger the adjustment value,

the narrower the bottom margin of the image becomes.

5.1.4.12 <044: Horizontal scan end position correction (superfine:scanning on ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which horizontal scanning of a FAX document scanned in superfine mode ends. The larger the adjustment value, the narrower the bottom

margin of the image becomes.

5.1.4.13 <045: Horizontal scan end position correction (fine:scanning on ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which horizontal scanning of a FAX document scanned in fine mode ends. The larger the adjustment value, the narrower the bottom margin

of the image becomes.

5.1.4.14 <046: Horizontal scan end position correction (standard:scanning on ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Adjust the position at which horizontal scanning of a FAX document set to the standard scan resolution ends. The larger the adjustment value, the narrower the

bottom margin of the image becomes.

5.1.4.15 <047: Vertical scan magnification correction (when scanning on a document fed from ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Correct the magnification of vertical scanning of a document fed from the ADF. The larger the adjustment value, the more the image stretches in the vertical scan-

ning direction.

5.1.4.16 <048: Horizontal scan magnification correction (when scanning on a document fed from ADF)>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Correct the magnification of horizontal scanning of a document fed from the ADF. The smaller the adjustment value, the more the image stretches in the horizontal

scanning direction.

This menu is used to adjust the ADF feed motor speed. If you changed the adjustment value in this mode, the adjustment value selected for SCAN NUMERIC>54

must also be incremented/decremented by the same amount.

Do not change the adjustment value extremely.

5.1.4.17 <193: ADF special standard-sized paper: LGL misidentification-ready>

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LEGAL").

0: LEGAL

1: FOOLSCAP

2: M_OFFICIO

3: A_FOOLSCAP

4: FOLIO

5: G_LEGAL

6: A_OFFICIO