Jam Code; 1Jam Codes (Related To Printer Unit); 2Jam Codes (Related To Finisher); 3Jam Codes (Related To Adf) - Canon iR2030 Portable Manual

Chapter 3

3.2 Jam Code

3.2.1 Jam Codes (Related to Printer Unit)
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Code Name
0104 Delay jam in paper
pickup section
0208 Stationary jam in paper
pickup section
010c Delay jam in deliver
section
0210 Stationary jam in
delivery section
0214 Stationary jam in
machine
1118 Door open jam
3.2.2 Jam Codes (Related to Finisher)
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Code Name
0130 Delayed feed jam
0231 Staying paper jam
0033 Stack ejection jam
0035 Staple jam
1036 Power-on jam
1137 Door open jam
3.2.3 Jam Codes (Related to ADF)
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Code
0000 Unknown jam
0007 Initial stationary
0008 Read sensor delay
0009 Read sensor stationary
000a Paper absence (Pull out the document.) PI11
000c Delivery reversal sensor delay
000d Delivery reversal sensor stationary
000e ADF cover open
000f User ADF open
0010 Pickup NG
3.2.4 Jam Codes (Related to Duplex Unit)
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
10
Sensor No.
SR209 The registration sensor cannot detect the leading edge of paper from the moment paper pickup starts to the
moment the jam detection time is reached.
SR209 The registration sensor cannot detect the no paper status specified time before the leading edge of the picked
up paper reaches this sensor.
SR202, - The fixing delivery sensor cannot detect presence of paper within the specified time after turning on of the
SR203, registration clutch.
SR209 - The fixing delivery sensor detected absence of paper within the specified time after the sensor had detected
presence of paper within the specified time after turning on of the registration clutch.
- The No.1 delivery sensor cannot detect presence of paper within the specified time after turning on of the
fixing delivery sensor.
SR202, - The fixing delivery sensor cannot detect absence of paper within the specified time after turning off of the
SR203 registration clutch.
- The fixing delivery sensor cannot detect absence of paper within the specified time after the sensor detected
the leading edge of paper.
- The No.1 delivery sensor cannot detect absence of paper within the specified time after the sensor detected
the leading edge of paper.
SR202, Paper was detected in the paper transport path during initial rotation, during automatic delivery, at the end
SR203, of cleaning, or at reception of an emergency stop command.
SR209
SR202, The door was opened when there was printing paper in the transport path.
SR203,
SR209,
SW2, SW3
Sensor No.
PI5 The inlet sensor is not turned on within the specified time after reception of a paper ejection signal from
the host machine.
PI5 The inlet sensor is not turned off even if paper is fed by the specified distance after the leading edge of
the paper from the host machine has passed through the sensor.
PI1 When a paper stack is ejected, the HP sensor is not turned off within the specified time.
Stapler HP The stapler HP sensor was turned off once after start of stapler operation, but the HP has not been reached
sensor within the specified time.
(built in
stapler)
PI5 The inlet sensor detected paper at power-on.
SW1 The front cover switch detected opening of the front cover during standby or copy operation.
Name Sensor No.
-
PI6,PI7,PI8 Paper is detected in the transport path before the DADF starts initial operation.
PI7,PI8
PI7
PI6,PI7
PI6
PI10
sensor of
the reader
unit
-
T-3-2
Description
T-3-3
T-3-4
Other errors
The read sensor does not detect paper when the paper has been fed by the predetermined distance
since reception of a pickup request.
The trailing edge of paper is not detected when the paper has been fed by the predetermined distance
since detection of it by the read sensor.
The Document set sensor has been held off since start of pickup.
The delivery reversal sensor does not detect paper since the paper has been fed by the predetermined
distance since the read sensor was turned on.
The trailing edge of paper is not detected when the paper has been fed by the predetermined distance
since the delivery reversal sensor detected the paper.
The feeder cover was opened during operation (of the drive system).
The ADF was opened during operation (of the drive system).
The registration sensor has been held off since paper pickup started.
Description
Description
0017-6038
0017-6039
0017-6040
0017-6041