Sssw-Sw05; Sssw-Sw12 - Canon iR2030 Portable Manual

5.1.1.4.4 Detailed Discussions of Bit 4
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to select the time length during which low-speed signals are ignored after transmission of the CFR signal.
If the condition of the line is not good and, therefore, the reception of image signals is difficult, select '1500 ms.'
5.1.1.4.5 Detailed Discussions of Bit 5
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
In the countries that need approval of CI signal frequency check, no checking on frequency set at PBX when changing the frequency to PSTN setting and PBX
setting for frequency checks.
5.1.1.4.6 Detailed Discussions of Bit 6
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Selects whether or not to transmit CNG signal during manual transmission.
In manual transmitting to a fax with the FAX/TEL switching mode, if there are frequent errors due to failure to switch to fax mode, select "Transmitted" for the
CNG signal.
5.1.1.4.7 Detailed Discussions of Bit 7
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Selects whether or not to transmit CED signals during manual reception. If the other fax does not transmit even when you start manual reception, select "Transmit-
ted" for the CED signal.

5.1.1.5 SSSW-SW05

5.1.1.5.1 List of Functions
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Bit
0
1
2
3
4
5
6
7
5.1.1.5.2 Detailed Discussions of Bit 1
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read in text mode.
Scanning direction in conversion follows the Bit 2 setting of SW14.
5.1.1.5.3 Detailed Discussions of Bit 2
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read in text/photo mode while bit 1 is set to '1'.
Scanning direction in conversion follows the Bit 2 setting of SW14.

5.1.1.6 SSSW-SW12

5.1.1.6.1 List of Functions
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Function
not used
Conversion from mm to inch (text mode)
Conversion from mm to inch (text/photo mode)
not used
not used
not used
not used
not used
T-5-4
1
-
convert
convert
-
-
-
-
-
0
-
do not convert
do not convert
-
-
-
-
-
Chapter 5
0017-6060
0017-8523
0017-6063
0017-6064
0017-6065
0017-6066
0017-6067
0017-6068
21