Replacing The Composite/Articulating Footplate Heel Loop; Disassembly; Assembly - Invacare Formula Owner's Operator And Maintenance Manual

Replacing the Composite/Articulating Footplate Heel
Loop
NOTE: For this procedure, refer to FIGURE 6.13.

Disassembly

Composite
1. Remove the mounting screw and coved
washer that secures the lower half of
the footrest to the swingaway footrest

assembly.

2. Remove the lower footrest assembly.
3. Remove the mounting screw and
locknut that secure the heel loop to the
footrest.
4. Slide heel strap over cane of footrest
assembly.
Articulating
1. Remove the two mounting screws that
secure the heel loop to the articulating
footplate.
Assembly
1. Replace heel strap/loop.
2. Reverse steps in Disassembly to
assemble.
NOTE: When securing heel loop to the footrest assembly, tighten mounting screw until the spacer
is secure.
Part No 1143155
SECTION 6—FRONT RIGGINGS
Cane of Footrest
Assembly
Locknut
Articulating
Mounting Screw
Heel Loop
Articulating
Footplate
FIGURE 6.13 Replacing the Composite/
Articulating Footplate Heel Loop
49
Composite
Mounting
Screw
Spacer
Heel Loop
Composite
Footplate
Formula™CG Powered Seating