Replacing Composite/Articulating Footplate Heel Loop - Invacare Adjustable ASBA Service Manual

SECTION 6—FRONT RIGGINGS

Replacing Composite/Articulating Footplate Heel Loop

NOTE: For this procedure, refer to FIGURE 6.10.
NOTE: Reverse steps in this procedure to assemble.
NOTE: When securing heel loop to the footrest assembly, tighten mounting screw until the spacer
is secure.
Composite
1. Remove the mounting screw and coved
washer that secures the lower half of
the footrest to the swingaway footrest
assembly.
2. Remove the lower footrest assembly.
3. Remove the mounting screw, spacer
and locknut that secure the heel loop to
the footrest.
4. Slide heel strap over cane of footrest
assembly.
Articulating
1. Remove the two mounting screws,
washers and spacers that secure the
heel loop to the articulating footplate.
Adjustable ASBA Seat
Composite
Cane of
Footrest
Assembly
Articulating
Mounting Screw
Washer
Spacer
Heel Loop
Articulating
Footplate
FIGURE 6.10 Replacing Composite/
Articulating Footplate Heel Loop
30
Mounting Screw
Spacer
Composite
Footplate
Locknut
Part No 1143238