Using The Four Way Toggle - Invacare Formula Owner's Operator And Maintenance Manual

Using the Four Way Toggle

NOTE: For this procedure, refer to FIGURE 5.1.
1. Make sure the wheelchair is on a level surface.
2. Refer to the chart for the operation of the seating system using a four way toggle.
NOTE: The chart shows the factory programmed settings only. Switch assignments can be
reprogrammed.
SEATING SYSTEM
Formula CG - Tilt Only
Formula CG - Recline
w/Legs
Formula CG - Tilt/Recline
Formula CG - Elevate
Only
Formula CG - Tilt/Recline/
Elevate w/Legs
Formula CG - Tilt/Recline
w/ Legs
Formula CG - Tilt/Elevate
Legs Only
3. Release four way toggle to neutral position.
Part No 1143155
SECTION 5—POWERED SEATING OPERATION
FORWARD
Decrease the Tilt Increase the Tilt
Angle
Decrease the Increase the Recline
Recline Angle
Decrease the Increase the
Tilt Angle & Legs Tilt Angle & Legs
Down
Elevate Up Elevate Down
Increase/Decrease Increase/Decrease
the Tilt Angle the Recline Angle
and Power legrest
Up/Down.
Increase/Decrease Increase/Decrease
the Tilt Angle the Recline Angle
and Power legrest
Up/Down.
Decrease the Increase the
Tilt Angle Tilt Angle
Power Legrest Up Power Legrest
Four Way Toggle
Rear
Right
FIGURE 5.1 Using the Four Way Toggle
29
FOUR WAY TOGGLE
REAR LEFT
OFF
Angle
Power Legrest Up
Angle
Decrease the
Recline Angle
Up
OFF
Elevate Up/Down
Power Legrest Up
Elevate Up
OFF
Down
Left
LED
Forward
Formula™CG Powered Seating
RIGHT
OFF
Power Legrest
Down
Increase the
Recline Angle
OFF
Power Legrest
Up/Down
Power Legrest
Down
Elevate Down
OFF