Activating Sto Via Profisafe; Defining The Commissioning Method - Siemens SINAMICS G120 Function Manual

Commissioning
4.3 Basic Safety
4.3.2

Activating STO via PROFIsafe

Procedure
● Go online with STARTER.
● In STARTER, call up the screens displaying the fail-safe functions and click on "Change
4.3.2.1

Defining the commissioning method

●
●
●
●
76
settings":
①
Set "STO via PROFIsafe".
②
If you require the status signal "STO active" in your higher-level controller,
interconnect it accordingly.
③
Enter the same PROFIsafe address as a hexadecimal value that you defined in the
hardware configuration, see Section Configuring communication in STEP 7 (telegram 30)
(Page 64).
④
Click the button to set the STO.
Safety Integrated Function Manual, SINAMICS G120
Function Manual, 07/2010, FW 4.3.2, A5E03052391B AA