Setting examples
Redundant master station
The following explains the settings for the master station when used in a redundant master station configuration.
■System configuration example
■Setting in the master station
Connect the engineering tool to the CPU module on the control system and set the parameters.
In a redundant system, the same program and parameter are written to both systems. A new project does not need to be
created for the standby system.
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [OK] button to add the module labels of the CPU module.
1 FUNCTIONS
1.7 Redundant System Function
1
95