Setting In The Master Station And Remote Device Station - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Setting in the master station and remote device station

Connect the engineering tool to the Safety CPU of the master station and set parameters.
Setting
Master station (station No.0)
1.
Set the Safety CPU as follows.
[Project]  [New]
2.
In the following window, enter a password and re-enter password, and click the [OK] button.
Local station (station No.1)
3.3 Communication Example of Safety Communication Function
Remote device station (station No.2)
3 PROGRAMMING
175
3