Safety Communication Setting - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

If the transfer target network module is on a network other than CC-Link IE Field Network, set the transfer
target link devices within the own station send range of the network module. If the link devices are set within
the send range of another station, the transferred data are overwritten with the send data of another station.
Master station
(station No.0)
RX
0

Safety Communication Setting

Set whether to use the safety communication function or not and set safety connections.
Item
To Use or Not to Use the Safety Communication
Setting
Safety Communication Setting
Set the following items before configuring the safety communication setting.
• "Network Configuration Settings" in "Basic Settings" ( Page 129 Network Configuration Settings)
• "Parameter Processing of Slave Station" in "Network Configuration Settings" under "Basic Settings" (
User's manual for the slave station used)
If the above items are not set, the slave station is not displayed as the target module in "Select the target
module for the Safety Communication Setting" window and safety communications cannot be set.
Network module
LB
0 to 3F
1000 to 103F
Description
Set whether to use the safety communication
function or not.
Set the safety connections and transfer ranges of
safety devices required for safety communications.
0
Set this within its own
station send range of
the network module.
1000
Own station send range
Other station send range
Setting range
• Use
• Not Use
(Default: Not Use)
Page 153 Setting items
2 PARAMETER SETTINGS
151
2.4 Application Settings
2