Setting In The Master Station - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Setting in the master station

Connect the engineering tool to the CPU module of the master station and set parameters.
Setting
Master station (station No.0)
1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [OK] button to add the module labels of the CPU module.
3.
Set the master/local module as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
Local station (station No.1)
3.2 Communication Example Using the Submaster Function
Submaster station (station No.2)
3 PROGRAMMING
161
3