Setting At The 2Nd Line Board (Optional) Installation - Toshiba E-STUDIO45 Operator's Manual

Setting at the 2nd Line Board (optional) Installation

Installing the 2nd line board (optional) allows transmission during reception, reception during transmis-
sion, and simultaneous two communications of transmission / reception.
When the 2nd line is used, the following function setting and registration are required.
• Entering terminal ID
• Dial type setting
• line-2 setting
Dial Type Setting
1
Press the SETTINGS
menu, then the INITIAL SETUP key.
2
Press the LINE SELECT
3 Select either of the dial type (line 2) setting from
among the DP and MF keys.
• Press the NEXT or PRE key to switch between the
screens as required.
• DP , MF Page 5-17
4
Press the SET key.
Page 5-12
key to display the settings
key.
1
2
3
4
5
6
7
8
9
10
11
12
5-19
5-19