Toshiba E-STUDIO45 Operator's Manual page 25

3. ORIGINALS (Cont.)
Setting Originals (Cont.)
When Using the Reversing Automatic Document Feeder
1
• When the originals are placed on the reversing automatic docu-
ment feeder, they start to be both scanned and sent from the
uppermost page.
2
1 After aligning the edges of originals well, place them
face up and align the slides to the width of the origi-
nals.
3
• You cannot mix A series format (A3, A4, A5) and B series
format (B4, B5) or LT series and COMP .
• LT/A4 size originals are rotated 90° so that they are sent as
LT-R/A4-R originals.
4
• If a mixture of LD and LG, A3 and A4, or B4 and B5 origi-
nals are placed, they are sent at their original sizes.
• When LD, LG, LT-R, COMP , A3, B4, A4-R, B5 and FOLIO
5
originals are placed as shown in the figure on the right, the
pre-entered sender's information is printed at the position
shown shaded in the figure and sent to the remote FAX.
• Entening the terminal ID
6
7
• When LT, ST-R, A4, A5-R or B5-R originals are placed as
shown in the figure on the right, the pre-entered sender's
information is printed at the position shown shaded in the
8
figure and sent to the remote FAX.
9
10
11
12
2-8
SENDING A FAX (BASIC)
Page 5-11
Slides
Sender's information
Sender's information