Reverse Motor; Radf Open/Close Sensor; Pc Board; Jam Access Cover Switch - Toshiba MR-3011 Service Manual

12.4.6 Reverse motor

(1) Disconnect one connector.
(2) Remove 2 screws and take off the reverse motor.

12.4.7 RADF open/close sensor

(1) Disconnect one connector.
(2) Remove one screw and take off the RADF open/
close sensor with the bracket attached.
(3) Release the latches and remove the sensor from
the bracket.

12.4.8 PC board

(1) Disconnect 12 connectors and release 4 lock
supports.
Take out the PC board

12.4.9 Jam access cover switch

[A] Disassembly
Disconnect 3 connectors and remove one fixing
screw. Take off the switch.
[B] Assembly and adjustment
Fix the jam access cover switch to the bracket.
Connect the connectors as shown in the right
figure.
October 2000 © TOSHIBA TEC
Connector
Connector
PC board
12-10
Orange
Gray
White
MR-3011/3012 DISASSEMBLY