Direct Tx - Toshiba E-STUDIO45 Operator's Manual

Direct TX

When you have placed the originals and performed the sending operation, the remote FAX is immedi-
ately dialed, and the originals are sent after connecting with the remote FAX with each page scanned
separately.
• You can check immediately if the original has been sent to the remote FAX.
• Once scanned, the originals are not stored in the memory.
• You can specify only one remote FAX at a time.
• After a page has been sent, the next page is scanned. So, it takes a little time to scan all pages.
• If an original is placed on the original glass, the scanning conditions can be changed for each page.
Page 2-11
* Memory TX is set as the initial setting. Changing the initial setting to direct TX
Direct TX by Optional Setting
1 Place the original.
2 Press the PHONE BOOK key to display the phone
book menu, then the OPTION key.
3
Press the DIRECT TX key, set the other transmis-
sion conditions
key.
4 Specify the remote FAXes.
• Specifying by digital keys
• Specifying by phone book
5 Press the START key.
• The remote FAX is dialed immediately and communication
is started.
• Canceling the direct transmission
Page 2-6
then press the SET
( Page 2-10),
Page 2-12
Page 2-13
Page 2-24
Page 5-16
10
12
2-19
1
2
3
4
5
6
7
8
9
11