Toshiba E-STUDIO45 Operator's Manual page 56

Setting Up the Relay Mailbox
This section describes how to set up the relay mailbox in the
local hub.
1
Perform steps 1 to 4 of the procedure for "Setting
Up a Mailbox of Confidential and Bulletin Board".
• Press the RELAY key in step 2.
2 Select the remote FAXes for multi-address relay mail
by the phone book or group.
• Press the GROUP key to display the group list.
• Press the PRE
• You can search the remote FAX from ID number (
2-16) and letters (
3
Make sure that the registration details are correct,
and press the SET
4 Select whether you want to register the destination
to which the multi-address relay mail transmission
is to be replied.
• If you press the
dure is completed, and the box will be opened.
5 Specify the destination to which the multi-address
relay mail transmission result is to be replied by
phone book or the digital keys.
• Only one remote FAX can receive the transmission result.
• To correct the remote FAXes, if they are specified by the
phone book, press the same remote FAX key again to clear
the highlight, and press the correct remote FAX key. If speci-
fied by the digital keys, press the B Space key and enter
the correct number.
6
Make sure that the registration details are correct,
and press the SET key.
Tip
The mailboxes that have been registered can be confirmed in
the mailbox/relay box report.
or NEXT key to switch the screen.
Page 2-17).
key.
NO key, the relay box setting up proce-
Page 5-39
Page
1
2
3
4
5
6
7
8
9
10
11
12
3-9