Toshiba E-STUDIO45 Operator's Manual page 20

• Mailbox Transmission
You can have confidential, bulletin board, multi-address relay mail communication with remote FAXes
that support the ITU-T F code functions.
• Polling Transmission
You can store originals in the memory, and wait for a request to send the originals from a remote FAX.
When a request arrives, the originals are automatically sent to the remote FAX that sent the request.
In this way, the remote FAX can receive originals at any convenient time.
You can also inhibit reception of documents by remote FAXes not having the same polling number by
appending the document with a password.
• Chain Dial Communication
When using the FAX communication network, you can combine two or more dialing operations (by
phone book and direct entry), input and send information such as service codes one after another.
• Batch Transmission
You can have the copier automatically send two or more reserved jobs for one remote FAX at a time.
This function can reduce the communication cost by sending multiple originals to the same destina-
tion at one time.
This operation is automatically applied when more than one original is sent to one remote FAX with
the same transmission functions specified for each reserved TX job (if department codes are used,
they must be the same as well).
1
2
3
4
5
6
7
8
9
10
11
12
2-3