Sending Two-Sided Originals (Two-Sided Scanning) - Toshiba E-STUDIO45 Operator's Manual

4. SENDING TWO-SIDED ORIGINALS (TWO-SIDED SCANNING)

You can scan and send two-sided originals using the reversing automatic document feeder.
• Setting originals when sending LT/A4 two-sided originals.
To set the originals on the reversing automatic document feeder, change the direction of original
feeding depending on the bound position.
• Two-sided originals bound along the
widthwise direction
• Two-sided originals bound along the
lengthwise direction
• Every time a transmission is completed, the unit will automatically return to the "Home Position" set-
ting.
• This function can be used only when you send originals by memory TX.
1 Place the original.
2
Set the transmission conditions.
3
Press the ADVANCED key to display the advanced
menu, then the TWO SIDED SCAN key.
• If the key for the desired function is not shown, press the
Next key to switch the screen.
4
Press the SET
5 Specify the remote FAXes.
• Specifying by digital keys
• Specifying by phone book
• Specifying by group
• Specifying by multi-address transmission
6
Press the START key.
Page 2-6
Page 2-10
key.
Page 2-12
Page 2-13
Page 2-14
Page 2-15
1
2
3
4
5
6
7
8
9
10
11
12
3-5