Removing The Fan Tray - Alcatel-Lucent OmniSwitch 9800E Hardware User's Manual

Chassis Fan Tray

Removing the Fan Tray

1
Begin by loosening the two captive screws located at the left and right sides of the fan tray. Use a
flat-head screwdriver, if necessary.
2
After the captive screws have been loosened (i.e., disengaged from the threaded holes in the chassis),
pull the fan tray straight out from the switch by holding it from the external surface and avoid touching
inside the fantray. Refer to the diagrams below for more information.
page 2-34
Loosening the Fan Tray Captive Screws
Detaching the Fan Tray from the Chassis
OmniSwitch 9000E Series Hardware Users Guide
Chassis and Power Supplies
Fan Tray
Captive Screw Locations
Detach the fan tray by pulling it straight out
and away from the chassis.
December 2008