Alcatel-Lucent OmniSwitch 9800E Hardware User's Manual page 39

Chassis and Power Supplies
Note. If a module of the same type is already installed in the chassis, you can use the show ni command to
determine the power requirements for the module to be added. For example, if an OS9-GNI-C24E is to be
added to the chassis, and there is already an OS9-GNI-C24E installed at slot 8, enter the following
command:
-> show module long 8
Module in slot 8
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Firmware Version:
Admin Status:
Operational Status:
Power Consumption:
Power Control Checksum:
MAC Address:
ASIC - Physical:
Note that the module's power requirement is 67 watts, as shown in the "Power Consumption" field.
OmniSwitch 9000E Series Hardware Users Guide
OS9-GNI-C24E,
24pt 10/100/1000 Mod,
901765-10,
413,
1453410A,
NOV 16 2005,
5,
POWER ON,
UP,
51,
0x808,
00:d0:95:6b:0b:30,
0x1901 0x0201 0x0201 0x001e 0x001e 0x001e
December 2008
Monitoring Chassis Power
page 2-21