Os9-Xni-U2E Front Panel - Alcatel-Lucent OmniSwitch 9800E Hardware User's Manual

Network Interface (NI) Modules

OS9-XNI-U2E Front Panel

Module Status LEDs
OK1. Hardware Status. Displays solid
green when powered on and the XNI has
passed hardware diagnostic tests. Displays
solid amber when powered on and the XNI
has failed hardware diagnostic tests.
OK2. Software Status. Blinks green when
the XNI is operational and has successfully
loaded software. Displays solid amber
when powered on and the XNI has failed to
load software.
LINK/ACT LED
Each 10-gigabit port has a single LED for
monitoring XFP link status and activity.
The LED displays solid green when the
port is up; the LED blinks green when it is
transmitting or receiving packets in a link
up state. The LED is off when no link is
detected.
OmniSwitch 9000E Series Hardware Users Guide
Module
Status
LEDs
OS9-XNI-U2E Front Panel
December 2008
10-gigabit Ethernet Ports
The OS9-XNI-U2E module provides 2
XFP connectors.
XNI Modules
page 4-9