Alcatel-Lucent OmniSwitch 9800E Hardware User's Manual page 94

Removing and Adding Modules
4
Once the module is firmly seated, secure the module to the chassis by tightening the two captive
screws. Be sure not to overtighten the captive screws. If you use a screwdriver, the torque used to tighten
the screws must not exceed 2.3 foot-pounds.
page 4-18
O K
1
O K
2
OmniSwitch 9000E Series Hardware Users Guide
Network Interface (NI) Modules
O K
1
O K
2
December 2008