Specifications; Performance Specifications - Mitsubishi QD60P8-G User Manual

3 SPECIFICATIONS

CHAPTER 3 SPECIFICATIONS
This chapter explains the performance specifications of the QD60P8-G, the I/O signals
for the programmable controller CPU, and the specifications of the buffer memory.
For the general specifications of the QD60P8-G, refer to the User's Manual of the used
CPU module.

3.1 Performance Specifications

The following table indicates the performance specifications of the QD60P8-G.
Model name
Item
Counting speed switch settings*1
Number of I/O occupied points
Number of channels
Count input Phase
signal
Signal level
Input derating
Counting speed
(Max.) *2
Counting range
Count type
Counter
Minimum count
pulse width
(Duty ratio 50%)
Dielectric withstand voltage
Insulation resistance
Connected terminal
Applicable wire size
Applicable solderless terminals
Internal current consumption
(5VDC)
Weight
External dimensions
*1: To change the counting speed, use the intelligent function module switch.
*2: The counting speed is affected by the rise/fall time of pulses. The countable counting speeds
3 - 1
30kpps 10kpps 1kpps
32 points (I/O assignment: 32 points for intelligent function module)
30kpps 10kpps 1kpps
Sampling pulse number
Accumulating count value
Input pulse value
Linear counter method, ring counter method
33.4 s
100 s 1ms
50 50
0.5
16.7 16.7
s s s s
ms
For 1 min at 1500VAC between AC external connecting terminals and general grounding
For 1 min at 500VAC between DC external connecting terminals and general grounding
For 1 min at 1780VAC between channels
5MΩ or more at 500VDC between AC external connecting terminals and general grounding
R1.25-3 (A solderless terminals with sleeves cannot be used.)
27.4 (1.08) (W) X 98 (3.86) (H) X 90 (3.54) (D) [mm (in.)]
(For details, refer to "Section 4.5 Switch setting for intelligent function module".)
are indicated in the table on the next page. Note that counting the pulses of long rise/fall time
may result in miscounting.
QD60P8-G
100pps 50pps
8 channels
1-phase input
5VDC/12 to 24VDC
Refer to the derating chart (Next page)
100pps 50pps
: 16-bit binary (0 to 32767)
: 32-bit binary (0 to 99999999)
: 32-bit binary (0 to 2147483647)
10ms 20ms
10
0.5 10
5 5
ms ms ms
ms ms
18 points terminal block
2
0.3 to 0.75mm
0.58A
0.17kg
MELSEC-Q
10pps 1pps 0.1pps
10pps 1pps 0.1pps
100ms 1s 10s
50
50 0.5 0.5
ms ms s
s 5s 5s
3 - 1
3