Mitsubishi QD60P8-G User Manual page 68

6 UTILITY PACKAGE (GX Configurator-CT)
6 - 3
(6) Number of parameters that can be set in GX Configurator-CT
When multiple intelligent function modules are mounted, the number of
parameter settings must not exceed the following limit.
When intelligent function modules are installed
to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q13UDH/
Q26UDH/Q03UDE/Q04UDEH/Q06UDEH/
Q13UDEH/Q26UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed to the
MELSECNET/H remote I/O station, configure the settings in GX Configurator so
that the number of parameter settings for all the intelligent function modules does
not exceed the limit of the MELSECNET/H remote I/O station. Calculate the total
number of parameter settings separately for the initial setting and for the auto
refresh setting.
The number of parameters that can be set for one module in GX Configurator-CT
is as shown below.
Target Module
QD60P8-G
(Example)
Counting the number of parameter settings in Auto refresh setting
Maximum number of parameter settings
Initial setting
512
512
512
512
2048
4096
512
Initial setting Auto refresh setting
24 (Fixed)
This one row is counted as one setting.
Blank rows are not counted.
Count up all the setting items on this screen,and add
the total to the number of settings for other intelligent
function modules to get a grand total.
MELSEC-Q
Auto refresh setting
256
256
256
256
1024
2048
256
8 (Max.)
6 - 3