Table of Contents
Advertisement
7 PROGRAMMING
< Carry over reset request >
7 - 10
MELSEC-Q
Write to buffer memory
Turn ON the operating condition
setting request flag (Y121)
Turn ON the operation condition
setting request flag (Y121) for 11ms
Turn OFF the operation condition
setting request flag (Y121)
Read of buffer memory
Turn ON the count enable (Y138)
Turn OFF the count enable (Y138)
Turn ON the comparison signal
reset request (Y130)
Turn OFF the comparison signal
reset request (Y130)
Read of error code
Turn ON the error reset request
Turn OFF the error reset request
Read of overflow detection flag
Counter reset request
Turn ON the counter reseting
Turn OFF the counter reseting
Read of carry over detection flag
Set "1" to the carry over
7 - 10
Advertisement
Table of Contents
