Mitsubishi QD60P8-G User Manual page 83

6 UTILITY PACKAGE (GX Configurator-CT)
6 - 18
(Example)
Click this button after selecting "Error reset request" in the setting (value) field of
"Error reset request" on the X/Y Monitor/Test screen.
Perform similar operation also for the "Operating condition setting request flag".
Close
POINT
• To reflect the new settings (values) on the module, you have to choose
"Operating condition setting request" for the "Operating condition setting request
flag" and click Execute test .
• "Error reset request"/"Comparison signal reset request" turns to "No request"
automatically if the error occurrence (X8 to XF)/accumulating counter comparison
flag (X10 to X17) turns "OFF" at the time of test execution.
Select "Error reset request"
Place cursor at "Error reset
request"
Click Execute test
Select "Oper. cond. set. req."
Place cursor at "Oper. cond. set.
req."
Click Execute test
Closes the screen that is currently open and
returns to the previous screen.
MELSEC-Q
6 - 18