Mitsubishi QD60P8-G User Manual page 21

2 SYSTEM CONFIGURATION
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02U/Q03UD/Q04UDH/Q06UDHCPU
Q13UDH/Q26UDHCPU
Q03UDE/Q04UDEH/Q06UDEH/
Q13UDEH/Q26UDEHCPU
If installed in a MELSECNET/H remote I/O station
2 - 3
(2) Support of the multiple CPU system
When using the QD60P8-G in a multiple CPU system, refer to the following
manual first.
• QCPU User's Manual (Multiple CPU System)
Write intelligent function module parameters to the control CPU of the QD60P8-G
only.
(3) Compatibility with online module change
The QD60P8-G supports the online module change function.
POINT
The QD60P8-G does not have the products of function versions A and B.
The products of function version C include the functions of the products function
versions A and B.
(4) Supported software packages
Relation between the system containing the QD60P8-G and software package is
shown in the following table.
GX Developer is necessary when using the QD60P8-G.
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Redundant CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Single CPU system
Multiple CPU system
Software Version
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.45X or later
Version 8.48A or later
Version 8.62Q or later
Version 8.68W or later
Version 6 or later
MELSEC-Q
GX Configurator-CT
Version 1.14Q or later
Version 1.16S or later
Version 1.25AB or later
Version 1.14Q or later
2 - 3