Mitsubishi QD60P8-G User Manual page 20

2 SYSTEM CONFIGURATION
Applicable CPU module
CPU type
C Controller module
2
2 - 2
CPU model
Q06CCPU-V
Q06CCPU-V-B
*1: Limited within the range of I/O points for the CPU module.
*2: Can be installed to any I/O slot of a base unit.
*3: Use the QD60P8-G module whose serial No. (first five digits) is 09012
or later.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to
the QD60P8-G and quantities for each network module model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
Applicable network
No. of modules
module
QJ72LP25-25
QJ72LP25G
Up to 64
QJ72LP25GE
QJ72BR15
*1: Limited within the range of I/O points for the network module.
*2: Can be installed to any I/O slot of a base unit.
REMARK
The Basic model QCPU or C Controller module cannot create the MELSECNET/H
remote I/O network.
1
*
No. of modules
Main base unit Extension base unit
Up to 64
Base unit
1
*
Main base unit of
remote I/O station
MELSEC-Q
2
*
Base unit
: Applicable, : N/A
2
*
Extension base unit of
remote I/O station
: Applicable, : N/A
2 - 2