Wyse 3315SE Reference Manual page 217

Table 39-1 Modify User Account Dialog Box, Continued
Function
Assign
Unassign
Up
Down
Toggle AutoStart
Connection Name
Description
Click on this command button to copy a connection
from Available Connections to Connection Name.
You must first select to highlight the connection you
want to copy.
Use this button to delete a connection from
Connection Name. You must first select (highlight) the
connection you want to delete.
Select a connection and click on the Up command
button to move it up one place in the Connection
Name list. If there is not two or more connections listed
in Connection Name, the button is deactivated.
Select a connection and click on the Down command
button to move it down one place in the Connection
Name list. If there is not two or more connections listed
in Connection Name, the button is deactivated.
Click on this command button to toggle between Yes
and No. These two choices are listed under AutoStart
in Connection Name.
List box displaying connections.
Connection Name
This list shows the connections available for use by a
terminal account.
Type
This is the section of the list that displays the
connection type of each connection.
AutoStart
This is the section of the list that displays whether the
connection will or the connection will not autostart.
193