Dhcp Firmware Upgrades; Automatic Dhcp Firmware Upgrades; Obtain An Ip Address From Dhcp Sever Radio Button; Dhcp Automatic Update Enable Check Box - Wyse 3315SE Reference Manual

35

DHCP Firmware Upgrades

Automatic DHCP Firmware Upgrades

1. Press the F2 key for the Terminal Properties dialog box.
2. Click on the Network tab.
3. Click on the Obtain an IP Address From DHCP Server radio button, if the
function is not enabled. See Figure 35-1.
Figure 35-1 Obtain an IP Address From DHCP Sever Radio Button
4. Click on the Apps tab.
5. Click on the DHCP Automatic Update Enable check box on the Apps
properties sheet, if the function is not enabled. See Figure 35-2.
Figure 35-2 DHCP Automatic Update Enable Check Box