Continuous Tone Coded Squelch System Features - Radio Shack HTX-200 Owner's Manual

CONTINUOUS TONE CODED
SQUELCH SYSTEM FEATURES
Your HTX-200 can transmit and receive a low-level, selectable
subaudible tone at the same time as it transmits (TX) or receives
(RX) a regular signal. This special tone lets you listen only to oth-
er radios set to the same tone frequency when you use the HTX-
200 in simplex operation. It also lets you match your radio to the
subaudible tone frequency used by a local repeater.
To enable the TX and RX tones for the HTX-200, follow these
steps.
1. Press
FUNC
or tone on).
2. Press or
3. To set a receive (RX) tone, press
Then press
on Page 36. For this example, 67.0 MHz was selected for
both the transmit and receive frequencies.
4. To set a transmit (TX) tone, press
Then press
on Page 36.
5. Press
PTT
+ . The current tone setting appears (tONE oF
to turn on the option . tONE on appears
or to select a tone frequency from the list
or to select a tone frequency from the list
to store all the settings.
+ . rC appears.
FUNC
+ . tC appears.
FUNC
.
35